Raspberry Pi with Samsung Smart TV

Raspberry Pi with Samsung Smart TV

In this blog, I will cover about steps to connect  Samsung Smart TV with Raspberry Pi .

Requirements:

 1. Samsung Smart TV with connected HDMI cable.

2.  Raspberry Pi module 

3.  A 5V micro USB power supply to power your Raspberry Pi. Be careful that whatever power supply you use outputs at least 5V; insufficient power will cause your Pi to behave in strange ways.

4. A USB wired keyboard.

5. A USB wired mouse.

Set Up:

1. Download the NOOBS software from here.
2. Extract the folder . It should look something like this:

        

       3. Format your SD Card with  SD Memory Card Formatter . (Note: You can  use any                 SD Card formatting tool or do it manually via Windows/Mac/Linux disk 

           management tool.)

      4. In the formatted SD Card, copy all the contents (as seen above) , in the SD Card.

      5. Insert the SD Card into the card slot on the Pi .

      6. Connect the HDMI cable (from the TV) to Pi HDMI slot.

      7. Switch on the TV and select Source as the HDMI cable connected. You might see a               "Unknown"next to the HDMI slot. This is your Raspberry Pi. Select this HDMI as        

          source.

      8. The complete Setup should look like this:

If you have any queries or issue in above issues. please add your comment below in the comment section